quick overview :

Hydraulic Bench

• The hydraulic bench is made of fiberglass reinforced polyester and mounted on wheels for mobility

Technical Specifications:

• Centrifugal pump: 0.37kw, 30-80 liter/min at 20.1 – 12.8m,  220 ~ 240V, 50~60Hz
• Runner: Stainless steel
• Sump tank capacity: 165 ~ 300 liters
• Small channe: 8 liter
• Flow measurement: Volumetric tank, Gauged from 0-7 liter for low flow values  and  from 0-40 liter for high values
• Control valve: For regulating the flow
• Open channel: To place the test module
• Measuring cylinder: Provided for the measurement of small flow rates
• Remote hand: Operating dump valve in the base of the volumetric tank
• Modules fixing: Easily interchangeable

Basic Hydraulic Feed System Module :

• Centrifugal pump: 0.37kw, 30-80 liter/min at 20.1 – 12.8m,  220 ~ 240V, 50~60Hz
• Impeller: Stainless steel
• Tank capacity: 140 liters approx.
• Flow meter: Yes
• Valve: Membrane type flow adjusting valve
• Safety switch: ON/OFF
• Support system: For accommodating the test module
• Mobility: Incorporates wheel for mobility

Bernoulli’s  Theorem  Demonstration  Module :

• Manometer range: 0 – 300 mm of water
• Number of manometer tubes: 8
• Upstream diameter of the throat: 25 mm
• Narrowing: Downstream 21º,  Upstream 10º
• Coupling system: Easy, quick and built in
• Frame structure: Anodized aluminum structure and panel of painted steel

 Flow  Meter  Demonstration  Module :

• Manometer range: 0 – 500 mm of water column
• Number of manometer tubes: 8
• Orifice plate diameter: 25 mm
• Flow meter: 2 – 30 liter / min
• Venturi dimensions: Throat diameter 20mm,  Upstream pipe diameter  32mm,  Downstream taper 21º,
• Upstream diameter 14º
• Orifice plate dimensions: Upstream pipe diameter 35 mm,  Downstream orifice diameter 19 mm
• Coupling system: Easy, quick and built in
• Frame structure: Anodized aluminum structure and panel of painted steel

 Fluid  Friction  Pipes  Unit  Module :

• Number of pipes of different diameter, material & roughness: 5
• Rough pipe (PVC): External diameter: 25 mm,  Internal diameter: 17 mm
• Rough pipe (PVC): External diameter: 32 mm,  Internal diameter: 23 mm
• Smooth pipe (PMMA): External diameter: 10 mm,  Internal diameter: 6.5 mm
• Smooth pipe (PVC): External diameter: 20 mm,  Internal diameter : 16.5 mm
• Smooth pipe (PVC): External diameter: 32 mm,  Internal diameter: 26.5 mm

• Angle seat valve : Internal diameter  20 mm
• Gate valve: Internal diameter  20 mm
• Diaphragm valve: Internal diameter  20 mm
• Ball valve: Internal diameter  20 mm

• In-line strainer : Internal diameter  20 mm
• Sudden widening : Section changes from 25 to 40 mm
• Sudden contraction : Section changes from 40 to 25 mm
• 90º elbow : Internal diameter  20 mm
• T junction : Inner diameter  20 mm
• 45º elbow : Inner diameter  20 mm
• 45º T junction : Inner diameter  20 mm
• Symmetrical Y branch : Inner diameter of each pipe  20 mm
• Double 90º elbow : Inner diameter  20 mm

• Pitot tube : Length : 30mm,  External diameter : 4 mm  and  Internal diameter : 2.5 mm
• Venturi tube : Length : 180 mm,  Larger section : 32 mm  and  Smaller section : 20 mm
• Diaphragm with measuring plate : Larger diameter 25 mm  and Smaller diameter 20 mm
• Quick action connections : 34 pressure tapings
• Two water manometers : Range : 0 – 1000 mm
• Two bourdon manometers : Range : 0 – 2.5 bar
• One flow meter : Range : 600 – 6000 liter / hour