Design Your Lab with Technical Educational Instruments in India

It is time to get high-tech technical educational instruments in your lab for a better learning experience and higher results. When we talk about technical instruments for educational, vocational, and polytechnic purposes, we are talking large instruments for technical training. 

Let’s not forget the basic principle of technical education is to provide hands-on learning, industry-specific learning, and practical education. Hence it is of utmost important to create a professional high-tech Lab with Technical Educational Instruments for future learning prospective. 

Types of Technical Educational Instruments in India

There are seven major categories of technical educational instruments. Each category of instruments have further instruments available for purchase:

1.    Compact Steam Power Plant Trainer

Compact Steam Power Plant The trainer is a top instrument and Atico Lab Export is a leading is technical educational instruments suppliers in India. It is because they are compact. To use this plant, you need:

·         Water supply 20 lit/min (approx.) and drain

·         Electricity Supply: I Phase, 220 V AC, 4 kW

·         Floor area of 1.5m x 0.75 m

Never the less, it is used to the study flow rate of KMTD, Heat transfer rate, and Overall Heat Transfer Co-efficient. This instrument consists of an SS shell with the inside of the copper tubes baffled on the outer side.

2.    Dynamic Shear Rheometer

The Dynamic Shear Rheometer, also known as DSR, confirms the linear viscoelastic properties of performance-graded asphalt binders. It does so at the refined temperatures of 5° to 85°C or 41° to 185°F.

Also, air bearing DSR confirms results of asphalt binder in standard testing format. This instrument is fit to operate smoothly under any strain or stress control modes. Knowingly, DSR requires an air supply of 1SCFM at 60 psi. The estimated weight of 109Kg.

3.    Gyratory Compactor

Our Gyratory Compactor, specially designed to carry bulk, can load up to 7 sieves of 6 inch or 8 inch diameter. Also, the 12-inch diameter sieves can also be accommodated with the use of an adaptor.

In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. It is certainly suitable for the operation on 230 volts, 50 cycles single phase A.C. Supply.

4.    SCADA System Fundamentals of Temperature Measurement

The SCADA System Fundamentals of Temperature Measurement is well-structured instructional material that sets out the technological fundamentals. It provides a step-by-step guide for the measurements and experiments.

Recording temperature is one of the basic tasks in the process of manufacturing automation. Even though electronic temperature sensors are the most widely used applications but still, conventional thermometer types are widely applied in many areas.

Hence, this type of instrument is basically a digital multimeter with precision resistors. It is used to calibrate the electrical measuring devices.

5.    Projectile Motion

Now study the detail of projectile motion with professional Technical Educational Instruments. You can easily understand the principles of Decomposition of motions and Acceleration of gravity. It is made of 5 major components:

·         Millimeter sheet (5x)

·         Carbon sheet (5x)

·         Projectile Launcher Assembly

·         Stainless Steel Sphere (2x)

·         Landing Base

In fact, with the help of a simple digital camera and a motion analysis software, it is also possible to study the motion-in-depth.

6.    SCADA System Heat Conduction in Gases and Liquids

It is known as the benchtop unit, which enables experiments to be performed on the steady-state of thermal conduction in liquids and gases. It consists of a cylindrical heat exchanger with a heated inner cylinder. The used material is made of aluminum and a water-cooled jacket.

As a matter of fact, to utilize Scada System Heat Conduction in Gases & Liquids, a supply of cooling water is required.

7.    SCADA System Heat Transfer Lab

The heat transfer model is specifically designed as a tool for the experimental investigation of heat transfer from a heated rod to the airflow. It comes under Technical Educational Instruments and comprises of a rod, oven and a copper specimen.

Why Choose Atico Lab Export for Technical Educational Instruments

Atico Lab Export is a premier manufacturer, supplier and exporter of Scientific Lab Equipments, Lab Instruments, Technical Educational Instruments Exporters in India, and Engineering Lab Appliance in India and Abroad. We carry 65 Years of Experience in global outsourcing of Science Lab Instruments

·         All our Equipment, Gears, and Instruments are ISO Certified.

·         Complete Customer Satisfaction with services and post-purchase warranty

·         Leading Manufacturer, Supplier & Exporter of Scientific Instruments and Laboratory Equipments Supplier in India.

·         Get all School Science Lab Supplies right under one roof.

In fact, the very first reason to choose Atico Lab Export is that we are an established brand in the International Market. All our equipment is of the highest quality with 100% reliability.

Conclusion

Undoubtedly, the countries are growing and so is technical education. It is important to understand and value the advanced technology which is manufacturing much better Technical Educational Instruments and equipment in India.

Also, there is no doubt that Atico Lab Export is leading in Science Lab Equipments. We specialize as a Technical Educational Instruments Manufacturer in India and the world.

To explore more equipment, gears, and instruments for labs in schools, universities, colleges, and private labs, visit www.aticolabexport.com.